| Pep
Gun Features |
| Double
Action Paddle |
| |
Quick
Shot: Each time the paddle is pulled
and released a 1 second burst of dust is delivered by the PEPGUN.
This allows the user to apply precise amounts of pesticide in very
specific locations. This not only cuts down on the time needed, it
reduces the amount of pesticide being applied. This makes it
extremely safe for applying dust in locations that are sensitive. |
| |
 Blast:
By pulling the paddle ½ way, the PEPGUN will release the dust in
a full fog. This is very useful when applying pesticides in large
open areas such as attics. In the blast mode, the PEPGUN will shoot
the dust up to 15ft very quickly. In most cases you can complete an
attic in under a minute. |
| Adjustable
Settings |
| |
The
PEPGUN has 9 settings located on the top cap (Off and 1-8). These
settings have been designed to adjust the amount of pesticide used
for every application. Based on the type dust and the settings used,
the technician can control the amount of dust. This provides the
technician total control over the amount of dust applied. They can
use small and or large amounts of dust, depending on the nature of
the project. The Owners Manual details the specific settings of the
PEPGUN based on the project and type dust. |
| Pressurized
System |
| |
Because
the PEPGUN is a pressurized system the technicia n
has total mobility throughout the location. They no longer have to
change outlets, move a bulky applicator or constantly refill a small
bulb duster. Once the system is turned off and powered down (takes
about 5 seconds) the technician can change dusts as needed. This is
extremely useful when going from an attic to weepholes or under
appliances. You can even use one dust for the attics, one for the
weepholes and another for the appliances with one applicator. This
flexibility alone will cut your application time! |
| Quick
Change Fittings |
| |
The
PEPGUN also has a quick change that lets the technician change
application tubes in seconds. |
| |
¤
|
Standard
Rigid Tube: 12" non-electrical conductive clear tube
that is used for standard jobs (attics, electrical outlets, wall
voids, etc). |
 |
| |
¤ |
Standard
Flexy Tube: 3ft. clear flexible tube that is great for
reaching underneath objects, deep in holes and general hard to reach
areas. |
| |
¤ |
Customized
Tubes: We can even
provide customized tubes up to 6ft. (rigid or flexible). |
| Works
With Most Dust Based Products |
| |
¤ |
Delta
Dust |
| |
¤ |
DRION |
| |
¤ |
FICAM |
| |
¤ |
BORID |
| |
¤ |
Boric
Acid (Powder) |
| |
¤ |
Seven
Dust |
| Overall
Key Benefits |
| |
¤ |
Light
weight and compact |
| |
¤ |
All
in one application tool |
| |
¤ |
Adjustable
settings for sensitive customers |
| |
¤ |
Easy
to use |
|
|
